Toa C-CC774 Manual do Utilizador

COMBINATION CAMERA OUTDOOR COMBINATION CAMERA ENGLISH QUICK MANUAL C-CC514, C-CC564C-CC574, C-CC714C-CC764, C-CC774 TABLE OF CONTENTS MENU SCRE

10 SEQUENCE The Preset Sequence function displays set positions of one same camera on the monitor in predetermined sequential order. MODE NORMAL/

11 PRIORITY number 1-8: ALARM/MANUAL/TIMER – 3s/5s/10s/15s/20s/30s/ 45s/1min Specify whether to display the set alarm ID on the screen and forcibl

12 SUMMER TIME OFF/ＯＮ/SET - FIRST DAY/LAST DAY Enables summer time between 2:00 AM on the set first day of summer time and 2:00 AM on the last day.

13 REFRESH OFF/EVERY/SUN-SAT If the camera is used for long uninterrupted periods of time, the camera position may deviate when the position is playe

14 FUNCTION AREA1-8 OFF/ON-L/ON-M/ON-H Set locations for motion detection sensors. OFF : No movement detected. ON–L: Detects movement at low sens

15 1. BEFORE SETTING 1.1. Address Display When Turning Power On When the camera’s power is turned on, the camera performs the initial operation (init

16 1.3. Setting Basic Operation Menu screen to be displayed and the operation slightly differ depending on the connected equipment, however there is

17 2. ENTERING CAMERA MENU SCREEN 1. Press the Menu key. (When a password is required, enter it with the numerical keypad.) The menu screen is disp

18 3. SELECTING THE LANGUAGE The language to be displayed on the screen can be selected among English, German, French and Italian. (Factory default:

19 4. SETTING PRESETS Settings such as camera direction, lens angular field of view, and focus can be preset in advance. Up to 255 positions can be se

2 SENSITIVITY OFF RESET(CAM SETTING) NO FRONT PAGE TOUR →DISPLAY →WHITE BALANCE ATW →E-ZOOM

20 4. Press the Set key. The position setting screen (the selected camera image) is displayed. Note “*** – ***” on the first line of the Setting scre

21 5. MAINTENANCE SETTINGS This menu is used to control functions as well as to display information required during installation or maintenance. 1.

Ver. 1.02

3 NEXT PAGE *MAINTENANCE* PRIVACY MASK FRONT PAGE →MOTION DETECTION 1POS MOTOR POWE

4 Commands Keystrokes Description PRESET MEMORY POS 1-255 - FINE SETTING Settings such as camera direction, lens angular field of view, and f

5 ANGLE OFF/ON/1s/3s/5s/10s Displays the coordinate. Pan (0 to 359°)/ Tilt (5 to -185°) fixed 8 characters. [ ***/-*** ] Pan angle (0 to 359°)/ ±Tilt

6 BACKLIGHT OFF/WIDE DYNAMIC (*1)/ WIDE DYNAMIC2 (*3)/ PATTERN1-3 The Backlight Compensation function makes the image displayed on the screen easier

7 AUTO FOCUS ONE PUSH/STOP AF/ CONTINUOUS (Factory default: ONE PUSH) ONE PUSH: Auto focusing is operated when the Auto-focus key is pressed.STOP AF

8 SYNC INT/LL – NT60Hz:00-82/PL50Hz:00-99 The camera’s sync system can be switched to the system that uses the power frequency. It is also possible

9 AUTO MODE AUTO KEY AUTO PAN/SEQUENCE/ TRACE1-2/TOUR1-16 One of the following 5 automatic functions can be assigned to the Auto key: (factor