Toa H-3WP Manual do Utilizador

OPERATING INSTRUCTIONSSPEAKER SYSTEM H-3H-3WPPlease follow the instructions in this manual to obtain optimum results from this unit.We also recommend

107. OUTDOOR USE (H-3WP ONLY)7.1. Installation Precautions• The H-3WP features drip-proof construction for permanent outdoor installation. However, do

119. PROTECTION CIRCUITRY INFORMATION• The speaker's tweeter has built-in overload protection circuitry. (The woofer does not have the circuitry.

11. SPECIFICATIONSModel No. H-3 H-3WPEnclosure Type Sealed typePower Handling 150 W (continuous program input, 8 Ω load)50 W (continuous pink noise

21. SAFETY PRECAUTIONS• Before installation or use, be sure to carefully read all the instructions in this section for correct and safeoperation.• Be

32. GENERAL DESCRIPTIONTOA's H-3 and H-3WP are wall-mounted 2-way speakers featuring wide horizontal dispersion. The H-3 is designed for indoor u

44. NOMENCLATURE AND DIMENSIONS The illustrations assume that the front grille is mounted to the speaker. 295 12931890 *183.5 *2162[Front] [Bottom][Si

55. INSTALLATION5.1. Contents Check to be sure that the following components are available in a complete set before installation:Speaker ... 1Machin

65.3. Installation ProceduresStep 1. Base frame mounting• The base frame can be mounted on the wall directly or using a commercial two-gang electrical

7Step 2. Wiring and impedance settingsStep 2-1. Unplug the detachable input connector fromthe speaker socket, and loosen the screwsof the terminal wit

8Step 2-4. Insert the detachable input connector into the speaker socket.Detachable input connectorLock tabSpeakerBase frameRotate both the left and r

9Step 4. Set the front grille to the speaker so that the three stud screws align with the corresponding studreceptacles, then push the grille onto the